Appliance Aid

Collapse

Wiring Done Right

Collapse

Announcement

Collapse
No announcement yet.

kitchenaid icemaker ksra22I

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • kitchenaid icemaker ksra22I

    posted by: joefriday

    hello, i have a kitchen side by side kitchen refr. # ksra22I. The icemaker isn't working. its the type that sits sideway, no arm.

    i remove it and tested the t and h with a jumper. The motor went around and i could hear the heater heating. i tested the v and L and water came out.

    The light above the beam is blinking two blinks. If i block the beam when the motor is moving, it stops.

    Now what?

    Thanks for your time,
    Joe

  • #2
    posted by: jeff1

    The light above the beam is blinking two blinks
    That would seem to be bad, a copy:

    Step#1: Open the freezer and view the status led

    (STATUS LED)

    2 BLINKS FOLLOWED BY 1 SEC. DELAY (REPEATED)

    POSSIBLE CAUSES: The flapper door on the emitter is blocking the beam or the optics are faulty.

    Step#2: Press the emitter flapper to unblock the optics beam

    (STATUS LED)

    2 BLINKS FOLLOWED BY 1 SEC. DELAY (REPEATED)

    POSSIBLE CAUSES: The optics are faulty. Replace the emitter and receiver boards.

    If the LED is on steady: The optics are working properly.

    ksra221
    Too short, appears to be part of a full model# and that 1 may be an I (eye).

    http://www.applianceaid.com/model-number.php

    Click image for larger version

Name:	Ice-Level-Control-Board-W10757851-01875723.jpg
Views:	3
Size:	81.8 KB
ID:	971

    Power control board kit, emitter and receiver icemaker control Manufacturer Number W10757851


    May learn some more once we have a full model#.

    jeff

    Comment

    Working...
    X